Paints and Primers
AquaShield Exterior Primer
Paints and Primers
AquaShield Exterior Primer
AquaShield Exterior Primer
AquaShield Exterior Primer is an acrylic co-polymer-based superior primer for the exteriors. AquaShield Exterior Primer with high grip & bonding capacity is a perfect primer to form a tougher yet flexible film, which adheres wonderfully to the surface applied. It is highly recommended for all kinds of emulsion paints. Use AquaShield Exterior Primer for priming before painting.
WHERE TO USE: It can be applied for priming on all types of exterior cement walls (RCC, asbestos sheet, concrete brick etc.) It does not require any type of curing or other coat like cement wash.
HOW TO USE:
Advantages AquaShield Exterior Primer
- No curing required.
- Forming a seal coat which is non-absorbent.
- Enhanced, better finish.
- Possible to increase coverage of paint.
- It creates toughness for walls.
- It is flexible.
- It is economical.
- It gives good support to paint which protects it from sun & heavy rain.
- Free of chlorides, sulphates, phosphates and nitrates.
- Ready mix and easy to use
- One 25kg sack of Aqua Grout Gp yields 22.5 liters of grout.
- In less demanding applications, the yield can be increased by mixing clean and sound 10mm of Aqua Grout Gp and aggregates in the proportion of 1:1 by volumeTM AQUA GROUT GP-30, 60 & 90 (Industrial Grout - General Purpose) ® with reduced flow.
- Available in various strength levels to fit everybody’s needs.
Coat Coverage
100-110 sq.ft. is covered per litre/coat
Shelf Life
2 years from date of manufacture in tightly closed container away from direct sunlight and excessive heat.
Precaution
Do not over thin or over extend the brush. Stir the primer well and strain before use. Do not apply when ambient temperature is less than 10°C. To remove persistent fungus/algae deposits (seen as black patches), apply 1:10 (1Ltr biowash & 10Ltr water) diluted solution on areas with brush. After 1 hour, clean the biowash applied surface with water and light brushing with coir brush. On dusty porous surfaces apply additional coat of primer for better adhesion. It is not recommended to apply putty coat over the priming coat.
Packaging
AquaShield Exterior Primer is available in 1, 4, 10 & 20Ltr attractive plastic container. Standard Carton packing: 1Ltr: 12 cans per carton. 4Ltr: 4 cans per carton. 10Ltr: Single bucket. 20Ltr: Single bucket.
