• +91 7976499139
  • support@aquasolve.co.in
  • New Link Road, Andheri (W), Mumbai

JOINTING MORTAR

Bond-A-Brick

"Bond-A-Brick" is not a well-known or widely recognized term or product in my database up to September 2021. It could potentially be a specific brand or product related to bonding bricks or masonry work. If you have more context or specific information about "Bond-A-Brick," please provide additional details, and I'll do my best to offer relevant information based on that information.

JOINTING MORTAR

Bond-A-Brick

Bond-A-Brick

Bond-A-Brick is a cementitious, durable, thin jointing mortar that provides a strong bond between fly ash/clay bricks. WHERE TO USE: Bond-A-Brick can be used for jointing work between fly ash and clay bricks.

HOW TO USE:

SURFACE PREPARATION:

Surface must be clean, free from dust, oil and grease that may affect bonding. Wet the surface before applying Bond-ABrick.

MIXING:

Mix one bag of 40kg of Bond-A-Brick with approx. 8 to 10 liters of clean water. Mix thoroughly until the desired paste is achieved. Ensure the paste is free from lumps before use.

APPLICATION:

Using a proper trowel, apply a thin uniform layer to the entire area of horizontal & vertical surface of bricks. The material can be applied at a recommended thickness of 2-4mm. Ensure that good contact is achieved between the adhesive mortar and brick surface. Continue laying the next brick and follow the same procedure to complete the structure. Clean the excess material and reuse after laying each brick.

Advantages Bond-A-Brick

  1. Dry premixed mortar.
  2. Easy to apply.
  3. Quick drying. Reduced shrinkage.
  4. Water resistant & good workability
  5. Prepared for convenience in handling, mixing & application.

Coverage

A 40kg bag covers approximately 60-70 sq.ft. for a coating of 5mm thickness.

Shelf Life

6 months from the date of manufacture.

Storage

Bond-A-Brick should be stored in a dry place and free from excessive moisture. It has a shelf life of 6 months in its original packing.

Precaution

Bond-A-Brick should not be exposed to direct atmospheric conditions. A partially used bag should be stored in airtight conditions.

Packaging

40kg bag.

Our Wide Range Of Products

Jointing Mortar

AquaGyp