• +91 7976499139
  • support@aquasolve.co.in
  • New Link Road, Andheri (W), Mumbai

WATER PROOFING

DripShield Plus 2k

Waterproofing is the process of making an object or structure waterproof or water-resistant so that it remains relatively unaffected by water or resisting the ingress of water under specified conditions.

WATER PROOFING

DripShield Plus 2k

DripShield Plus 2k

DripShield Plus 2k is a flexible, acrylic polymer modified, cement-based, two component waterproofing coating. It can be applied over concrete and masonry surfaces. It is easy to use and economical. This system comprises cement-based grey powder and acrylic polymer in liquid form, both supplied in pre-measured quantity. It can be applied by ordinary brush.

RAW MATERIALS: DripShield Plus 2k powder contains white/grey cement, meticulously selected grades of quartz-based extenders, waterproofing agents, polymeric bonding agents. Its liquid contains acrylic polymer, preservatives and defoamers.

WHERE TO USE: DripShield Plus 2k can be used in bathrooms, top-floor ceilings, swimming pools and water tanks. It is ideal for box-type waterproofing. It can also be applied on external surfaces since it provides excellent resistance to carbonation attacks.

HOW TO APPLY

SURFACE PREPARATION:

The surface should be free from oil, grease, dust, debris or any foreign particles. It should be cleaned mechanically using a brush or sand blasting etc. and finally the loose particles must be cleaned by pressure water jetting or with an air blower. Surface cracks more than 1mm should be sealed with Krackfill crack filler.

APPLICATION

DripShield Plus 2k is supplied in pre-measured ratio 2kg of powder to 1kg of liquid by weight. Pour the liquid in a bucket or vessel. Add the powder gradually under continuous stirring till you get a brushable consistency. Apply the first coat of DripShield Plus 2k mix prepared as described above, by brush over the prepared surface. Allow it to dry for 4-6 hours. The second coat should be applied at right angle to the completely dried first coat. DripShield Plus 2k coating should be cured for four days.

Advantages DripShield Plus 2k

• It is cement and polymer based so it is eco-friendly and non-flammable.
• It is flexible and hence deflections in the surface do not affect the coating.
• It can be applied to water tanks too since it is non-hazardous.
• It is a do-it-yourself product. It does not require skilled labour.
• It is not affected by carbonation attacks.

Precautions

Clean the tools with potable water before the material sets.

Storage

Keep DripShield Plus 2k in a cool, dry place. Protect the material from direct sunlight.

Coverage

3kg. of DripShield Plus 2k mix, i.e. in the ratio of 2kg of powder and 1 kg of liquid will cover approximately 15-20sq.ft. per two coats.

Our Wide Range Of Products

Water Proofing

Water Tite No 1

BoostX LWP

AquaSeal

Aqua Crete 151

Aqua Damp

Cool Cool Thanda Thanda